NEW! Polylit Plus panels are fiberglass reinforced polyester resin panels, are specifically designed to fit various light transmitting applications such as post frame buildings, pre-engineered metal buildings and residential applications. Polylit ® Plus provides 40% lower yellowing index, 20% higher impact strength and 45% better fire behavior compared to traditional polyester laminate.
Features:
- Excellent Light Transmission
- Lightweight
- Rust & Corrosion Resistant
- Highly Impact Resistant
- Chemical Resistant
Benefits:
- Low cost installation
- Designed to fit most applications
- Energy savings
- Contributes to sustainable constructions
Photo Gallery
Typical application
- Industrial buildings, warehouses, supermarkets, shopping centers,
- Light roofing for commercial constructions
- Patio roofing,
Cutting
Panels can be cut using power or hand saws. Saw blades should be fine-toothed carbide tipped or a safety fabric reinforced abrasive disc. Face shields and appropriate safety equipment should be worn by all operators. Some typical installation details are shown below.Drilling
All panels should be pre-drilled not less than 1-1/2″ from panel end, and the holes drilled a minimum of 1/16″ larger than the fastener diameter. Panels can be drilled singly or several at a time.Fasteners
When possible fastener should be installed at high points of the corrugation with spacing of 6″ to 8″ on center at end panel ends, and 12″ to 16″ on center for intermediate purlins and siding applications.Sealing
Seal end and side laps with a flexible non-hardening, UV-stabilized butyl caulk.Installation
Under no circumstances should panels be allowed to support undistributed loads such as the weight of a human body. Use only approved roof ladders for installation. Typical application
Profiles
1-1/4″
Width – 26″ Length – 24-3/8″
U – Panel
Width – 38″
Coverage – 35-5/8″
2-1/2″ x 1/2″ Wide
Width – 52-5/8″, 51-1/2, 34″, 26″
Coverage – 50-21/32″, 48″ 32″, 24″
Wheeling Channel Drain 2000
Width – 38-3/8″ Coverage – 36″
2-1/2″ x 1/2″ Narrow
Width – 26″ Coverage – 24″
Wheeling 38 Channel Drain
Width – 38-1/4″ Coverage – 35-7/8″
38″ Granite City Strong
Width – 38-1/8″ Coverage – 36″
Wheeling Channel Drain
Width – 38-1/4″ Coverage – 36″
KisRib
Width – 37-7/8″ Coverage – 36″
Century Drain
Width – 37-3/4″
Coverage – 35-7/8″
New Grand Rib III
Width – 37-3/4″ Coverage – 36″
Delta Rib
Width – 26-1/4″
Coverage – 24″
R – Panel
Width – 38″ Coverage – 36″
Pro IIA
Width – 38-1/4″ Coverage – 36″
Ridge Cap
Width – 24″
Flat Rolls
Width – 48″
Coverage – 50′ Rolls
