[Done][Last]
Text (5 of 5) in A Contractors Dream


Full Line of Accessories From the Factory



15-5

Accessories are provided for face fastening that meet or exceed requirements for pullover resistance, pullout, corrosion resistance and color matching with the GRANEX® matrix. Fasteners virtually disappear in the surface of GRANEX®, especially Series 20, due to the textured stone surface, and color matched fastener head.

Specific attention is needed for thermal break tape on steel studs to avoid 'stud shadows' created by thermal bridging which over time attracts condensation and airborne dirt. Thermal break tape is used on the exterior side of steel studs between the stud and GRANEX panels.

Color matched caulking (high quality width to depth ratio of 2:1) and polymer gasketing (EDPM high density) are the common accessories for sealing joints.

Aluminum Trim System: 2 piece extension sets for divider, end, inside and outside corners, adhesive in various colors.

Silicone Set System: Structural silicone, Norton V2100 tape and fasteners.

Hidden Screw System: Kit includes aggregate and polymer matrix.

Please note: not using company specified accessories voids warranty in accordance with our written instructions in the Technical Guide (See Main Menu title "How to Specify and Install GRANEX").




Email: sales@grahamfrp.com

GRAHAM FRP Composites

104 Maple Ave.
Inglewood, Ontario, Canada
L0N 1K0

Phone: 1 800 268-7410 or (905) 874-3065

Fax: (905) 838-3386