Text (3 of 16) in FRP Structurals

Vinylester Corrosion Properties Guide

7-3

Chemicals 				75°F	160°

Acetic Acid, 5% 			RE	RE
Acetone 				NR	NR
Aluminum Sulfate, 5% 			RE	RE
Ammonium Hydroxide, 10% 		RE	NR
Ammonium Nitrate 			RE	RE
Benzene 				NR	NR
Benzenesulfonic Acid, 5% 		RE	NR
Calcium Chloride 			RE	RE
Chloride Dioxide, 15% 			RE	NR
Chromic Acid, 5% 			RE	NR
Copper Sulfate 				RE	RE
Diesel Fuel 				RE	NR
Dibutyl Phthalate, 100% 		RE	NR
Ethylene Chlorohydrin 			NR	NR
Ethylene Dichloride 			NR	NR
Ethyl Ether 				NR	NR
Ethylene Glycol 			RE	RE
Fatty Acids, 100% 			RE	RE
Ferrous Sulfate 			RE	RE
Fluosilicic Acid, 1% 			RE	RE
Gasoline, 100% 				RE	NR
Hydrochloric Acid, 15% 			RE	NR
Kerosene 				RE	NR
Magnesium Chloride 			RE	RE
Methyl Alcohol 				NR	NR
Mineral Oil, 100% 			RE	RE
Naptha 					RE	NR
Nitric Acid, 5% 			RE	NR
Phosphoric Acid, 10% 			RE	RE
Phosphoric Acid, 30% 			RE	RE
Polyvinyl Acetate, 100% 		RE	NR
Sodium Bicarbonate, 10% 		RE	NR
Sodium Bisulfate 			RE	RE
Sodium Carbonate, 10% 			RE	NR
Sodium Chloride 			RE	RE
Sodium Hydroxide, 5% 			NR	NR
Sodium Hypochlorite, 5% 		RE	NR
Sodium Nitrate 				RE	RE
Sodium Silicate 			RE	NR
Sodium Sulfate 				RE	RE
Styrene 				NR	NR
Sulfuric Dioxide, Dry 			RE	RE
Sulfuric Dioxide, Wet 			RE	NR
Sulfuric Acid, 10% 			RE	RE
Sulfuric Acid, 20% 			RE	NR
Sulfuric Acid, 50% 			NR	NR
Toluene 				NR	NR
Trisodium Phosphate, 25% 		RE	NR
Water; Distilled, 100% 			RE	RE
Water; Sea, 100% 			RE	RE
Zinc Sulfate 				RE	RE

RE = Recommended NR = Not Recommended

The above corrosion property chart is a general guide only. The corrosion resistance of material depends greatly on its particular use.

104 Maple Ave.
Inglewood, Ontario, Canada
L0N 1K0